TIPS ABOUT HOW TO Extend Smok Pen Recharge Time


TIPS ABOUT HOW TO Extend Smok Pen Recharge Time

The Smok Pen is a new pen that was developed by two guys in California. They wanted to develop a cool writing instrument that looked like a real pen but had the opportunity to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the marketplace by storm.

smok pen

The Smok Pen has a built quality that is just great. I found that even though it is an electronic pen the build quality is simply as good as any of the pens that I have reviewed. Simply because of how they made the very best cap. You don’t need to be worried about the cap cracking or breaking on you Vape Shop Smok Valve Pen.

Both biggest differences that separate the Smok Valve from other pens may be the form of the coils and the way that they are built. Generally the coil on a Smok Pen is larger than on other pens. I think that they did this on purpose, to help make the pen feel more substantial.

If you take a look at a Smok Pen, you will notice that your body of the pen is round rather than smooth like other pens. On the back of the pen there is a little tab that houses the coil. Once you press on the tab you can easily turn the heating element on / off. I must say i liked this feature since it allows me to use the Smok Pen 22 whenever Personally i think like smoking.

To use the Smok Pen you have to keep the heat button pressed. Once the button is pressed, the heating element will begin to warm up. Once it gets to the appropriate temperature you can turn off the heating element. Smok recommends using a 22mm tank. I prefer a more substantial tank, but that’s just me.

When you put your Smok Pen in to the tank you will notice a indicator light seriously. The indicator light will remain green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. You should always put your pen in to the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids into the coil heads.

After you have completed this step, you should always check to see when you are at the right temperature for the coils to fire. Or even then you should turn the power off and try again. In case you are still not satisfied with your Smok Pen i quickly suggest you take it in for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just do not work as they should. I would recommend that you perform the next two steps, then go on and check the Smok Pen to see if it still has the electronic charging port.

Prior to going any further you should remove the battery from your own pen and unscrew the magnetic cap. You need to then take away the plastic sleeve that holds the sub-ohm. You will find a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. When you have loosened this wire you can then access the sub-ohm. You need to then take away the wire from the Smok’s body and carefully insert it in to the Smok pen’s electrical port, being careful to not touch any of the coils.

When you have placed the sub-ohm tank into the pen you should then place all of those other components including the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Turn on the power and follow the on screen instructions. You should place the pen’s battery in to the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it back off. When you first put the pen into the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set you then should follow the on screen instructions.

After the Smok Pen has reached the temperature that it needs to reach you need to then connect the two wires to the negative and positive on the positive post on the Smok unit. You should then connect another end of the battery to the negative post on the negative side of the Smok unit. The ultimate step would be to connect the positive cable to the bottom of the Smok’s power switch.

After all the components have been placed in to the pen, you should turn the energy on. Following the first test run, you should be able to start to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you need to remove the battery from the pen and then replace it with a brand new one. For your convenience there is also a green light that can be pressed so as to confirm the battery charging status. Once you have done these things and you also do not start to see the green light indicating charging, you should replace the battery.